Industry referencePainting Contractors Association · PCA P14 — Levels of Surface Preparation for Repainting and Maintenance Projects Receiving Architectural Coatings
What this explains: PCA P14 distinguishes four preparation levels and explains that existing surface condition and the selected preparation affect appearance, adhesion, durability and cost. Project specifications describing the type and extent of preparation take precedence.
Keep in mind: Applies to repainting/maintenance architectural coatings on previously finished surfaces. A written scope should identify the agreed preparation; citing P14 alone does not specify a level or promise restoration of every defect. No LMJ adoption or compliance is verified.
Read the original source ↗ (English · opens in a new tab)Source content reviewed: November 7, 2026
Document and review details
- Relevant section
- P14 sections 1, 2.1–2.5, 5.2 and 5.4.
- Applies to
- U.S. architectural painting industry guidance; project agreement controls as applicable.. Repainting/maintenance preparation, rather than a universal new-construction specification.
- Original document revision
- Not stated in the reviewed document · Printed identifier: 20230918 in the official linked filename
- Review method
- Source content reviewed with assistance from Codex
Niveles de Preparación de Superficies para Proyectos de Repintado y Mantenimiento que Reciben Revestimientos Arquitectónicos ↗ (Spanish · opens in a new tab)Official Spanish individual P14 linked from PCA Spanish page; scope and section 5.2 read. Layout and section organization differ; exact edition parity is not established.
Industry referencePainting Contractors Association · PCA P3 — Impact of Paint Color
What this explains: PCA P3 says the number and location of paint colors and color ranges belong in bid and contract documents. It also calls for precise placement when different materials or sheens share a surface. These choices affect estimating and project cost.
Keep in mind: Industry guidance does not demonstrate LMJ membership, certification, adoption or compliance. It supports documenting the actual agreed scope, not promising that every estimate already follows PCA. It does not endorse an aesthetic palette.
Read the original source ↗ (English · opens in a new tab)Source content reviewed: November 7, 2026
Document and review details
- Relevant section
- P3 sections 2.1–2.2, 5.1–5.2 and 5.6.2.
- Applies to
- U.S. architectural painting industry guidance; use as the identified voluntary standard in a project agreement as applicable.. Paint color count, range, placement and associated bid/contract scope.
- Original document revision
- Not stated in the reviewed document · Printed identifier: 20230918 in the official linked filename
- Review method
- Source content reviewed with assistance from Codex
PCA P3 — Designación del color de pintura ↗ (Spanish · opens in a new tab)Official Spanish individual standard linked from the PCA Spanish page; sections 1, 2 and color-placement provisions read. Title, organization and wording differ from the English file, so do not claim exact edition parity.
Government guidanceU.S. Environmental Protection Agency · A Brief Guide to Mold, Moisture and Your Home
What this explains: Fix the water problem and address mold before painting. EPA recommends indoor relative humidity below 60%, ideally 30–50%, where possible, to help control mold.
Keep in mind: These are indoor mold-control targets, not coating application limits. Remediation needs assessment; paint does not repair a leak. This does not establish an LMJ remediation qualification.
Read the original source ↗ (English · opens in a new tab)Source content reviewed: November 7, 2026
Document and review details
- Relevant section
- Mold Cleanup Guidelines; Moisture and Mold Prevention and Control Tips.
- Applies to
- Residential mold-prevention guidance in the United States.
- Original document revision
- February 18, 2026
- Review method
- Source content reviewed with assistance from Codex