Safety and handover

Discuss lead safety, protection and cleanup

Bring the right questions to the walkthrough before preparation, equipment use or cleanup begins.

Why does the property's age matter?

Tell the contractor if the home or child-occupied facility was built before 1978. Paid work that disturbs paint may fall under EPA's Renovation, Repair and Painting requirements, including firm certification and lead-safe practices. Ask who will assess the requirements and perform covered work before preparation begins. A newer-looking finish or ordinary cleanup plan does not settle the question, and this guide does not establish LMJ certification.

Why we recommend this
Government guidance

U.S. Environmental Protection Agency · Renovation, Repair and Painting Program: Contractors

What this explains: Paid work that disturbs paint in pre-1978 housing or child-occupied facilities generally falls under the RRP rule, including painting preparation. Covered work has education, training, firm-certification and work-practice requirements. Firms may not advertise or perform covered renovation work without certification.

Keep in mind: The page lists exceptions, including qualifying minor repair thresholds, and says window replacement and painted-surface demolition remain covered regardless of area. Pre-1978 does not prove lead is present. This source does not establish LMJ certification or authorize LMJ to offer covered work.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
Renovation Program Overview; Firms that Require Certification; Activities Covered By the Rule; Paint testing.
Applies to
United States federal RRP guidance; actual program jurisdiction and any applicable state/local requirements must be checked for a project.. Paid renovation disturbing paint; housing and child-occupied facilities within the rule.
Original document revision
March 31, 2026
Review method
Source content reviewed with assistance from Codex

Programa de Renovación, Reparación y Pintura de Plomo: Contratistas ↗ (Spanish · opens in a new tab)

Official Spanish related page linked by the English page; corresponding scope, certification and activities sections read.

Is any mask enough for painting work?

No. Respiratory protection must match the evaluated hazard and exposure; a particulate filter does not protect against gases or vapors. OSHA sets workplace requirements when respirators are necessary or employer-required, including selection and program responsibilities. Ask how hazards will be assessed rather than selecting protection from appearance alone. Product safety information and the actual task matter; required tight-fitting respirators involve medical evaluation and fit-testing requirements.

Why we recommend this
Government guidance

Occupational Safety and Health Administration, U.S. Department of Labor · 1910.134 — Respiratory protection

What this explains: When workplace respirators are necessary or employer-required, OSHA requires a worksite-specific respiratory program. Selection depends on evaluated hazards. Required users need medical evaluation, training and, for tight-fitting respirators, fit testing before use and at least annually. Construction section 1926.103 adopts the same requirements.

Keep in mind: Not a blanket requirement for the same mask on every painting task. Particulate filters do not protect against gases or vapors; specific protection depends on hazards and exposure. The standard also distinguishes voluntary use. No claim of LMJ program compliance, employee training or fit testing is established.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
1910.134(a), (c), (d), (e)(1), (f)(2), (k); 1926.103 note.
Applies to
United States federal OSHA requirements where applicable; verify relevant state-plan requirements.. Occupational exposure and respirator use, not a product endorsement.
Original document revision
Not stated in the reviewed document
Review method
Source content reviewed with assistance from Codex

How should access and protection be agreed?

LMJ planning suggestion

Point out stairs, high areas, narrow access and rooms that must remain usable. Agree who moves furniture, removes wall items, protects belongings and controls access to the work area. Equipment selection and setup need a task-specific plan that follows the instructions and applicable requirements. You do not need to climb or enter a difficult area to prepare an inquiry; describe the access issue for the walkthrough.

Why we recommend this
Industry reference

Painting Contractors Association · PCA P14 — Levels of Surface Preparation for Repainting and Maintenance Projects Receiving Architectural Coatings

What this explains: PCA P14 distinguishes four preparation levels and explains that existing surface condition and the selected preparation affect appearance, adhesion, durability and cost. Project specifications describing the type and extent of preparation take precedence.

Keep in mind: Applies to repainting/maintenance architectural coatings on previously finished surfaces. A written scope should identify the agreed preparation; citing P14 alone does not specify a level or promise restoration of every defect. No LMJ adoption or compliance is verified.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
P14 sections 1, 2.1–2.5, 5.2 and 5.4.
Applies to
U.S. architectural painting industry guidance; project agreement controls as applicable.. Repainting/maintenance preparation, rather than a universal new-construction specification.
Original document revision
Not stated in the reviewed document · Printed identifier: 20230918 in the official linked filename
Review method
Source content reviewed with assistance from Codex

Niveles de Preparación de Superficies para Proyectos de Repintado y Mantenimiento que Reciben Revestimientos Arquitectónicos ↗ (Spanish · opens in a new tab)

Official Spanish individual P14 linked from PCA Spanish page; scope and section 5.2 read. Layout and section organization differ; exact edition parity is not established.

What should be covered at the final walkthrough?

LMJ planning suggestion

Compare the completed surfaces with the agreed scope and record any remaining items. Confirm cleanup, the return of moved belongings and responsibility for leftover materials. Keep labeled paint information and care instructions. Before storing or disposing of leftovers, check the product instructions and local program for that waste; do not assume household collection accepts commercial waste. Ask when the new finish can be cleaned normally.

Why we recommend this
Industry reference

Painting Contractors Association · PCA P14 — Levels of Surface Preparation for Repainting and Maintenance Projects Receiving Architectural Coatings

What this explains: PCA P14 distinguishes four preparation levels and explains that existing surface condition and the selected preparation affect appearance, adhesion, durability and cost. Project specifications describing the type and extent of preparation take precedence.

Keep in mind: Applies to repainting/maintenance architectural coatings on previously finished surfaces. A written scope should identify the agreed preparation; citing P14 alone does not specify a level or promise restoration of every defect. No LMJ adoption or compliance is verified.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
P14 sections 1, 2.1–2.5, 5.2 and 5.4.
Applies to
U.S. architectural painting industry guidance; project agreement controls as applicable.. Repainting/maintenance preparation, rather than a universal new-construction specification.
Original document revision
Not stated in the reviewed document · Printed identifier: 20230918 in the official linked filename
Review method
Source content reviewed with assistance from Codex

Niveles de Preparación de Superficies para Proyectos de Repintado y Mantenimiento que Reciben Revestimientos Arquitectónicos ↗ (Spanish · opens in a new tab)

Official Spanish individual P14 linked from PCA Spanish page; scope and section 5.2 read. Layout and section organization differ; exact edition parity is not established.

Manufacturer guidance

Benjamin Moore · Regal Select Premium Interior Paint & Primer — Matte N548: Technical Data Sheet

What this explains: For Regal Select Matte N548, the U.S. technical sheet lists one hour to touch and one to two hours to recoat at 77°F (25°C) and 50% relative humidity. Cool conditions or high humidity extend dry, recoat and service times. Surface application temperature is 50–90°F; washing is allowed after two weeks. Coverage is 400–450 square feet per U.S. gallon, depending on surface texture and porosity.

Keep in mind: Example for N548 only. These figures are not a promise for every paint, sheen, climate, substrate or project. Touch-dry, recoat, washing and full cure are different milestones; the sheet does not supply a universal full-cure time.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
PDF page 1, Technical Data, Dry Time and Surface Temperature During Application; page 2, Surface Preparation and safety directions.
Applies to
U.S. product sheet. Regal Select Premium Interior Paint & Primer, Matte N548.
Product / sheen
Regal Select N548 · Matte
Original document revision
Not stated in the reviewed document · Printed identifier: N548 US 032525
Review method
Source content reviewed with assistance from Codex

Regal Select PREMIUM INTERIOR PAINT & PRIMER — MATTE N548 ↗ (Spanish · opens in a new tab)

Official Spanish sheet identifier: N548 SP 030823. The English sheet is N548 US 032525. These are different editions; the reviewed dry/recoat figures agree, but exact technical parity is not claimed.

Sources and review informationSee the references and when they were reviewed.

LMJ explains this information using the sources linked below. Product instructions and site conditions determine the appropriate approach. Referencing an organization does not imply its endorsement of LMJ.

Design and planning ideas are LMJ suggestions. These sources explain the technical guidance; they do not document LMJ projects or certifications.

U.S. Environmental Protection Agency · Renovation, Repair and Painting Program: Contractors
Government guidance

U.S. Environmental Protection Agency · Renovation, Repair and Painting Program: Contractors

What this explains: Paid work that disturbs paint in pre-1978 housing or child-occupied facilities generally falls under the RRP rule, including painting preparation. Covered work has education, training, firm-certification and work-practice requirements. Firms may not advertise or perform covered renovation work without certification.

Keep in mind: The page lists exceptions, including qualifying minor repair thresholds, and says window replacement and painted-surface demolition remain covered regardless of area. Pre-1978 does not prove lead is present. This source does not establish LMJ certification or authorize LMJ to offer covered work.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
Renovation Program Overview; Firms that Require Certification; Activities Covered By the Rule; Paint testing.
Applies to
United States federal RRP guidance; actual program jurisdiction and any applicable state/local requirements must be checked for a project.. Paid renovation disturbing paint; housing and child-occupied facilities within the rule.
Original document revision
March 31, 2026
Review method
Source content reviewed with assistance from Codex

Programa de Renovación, Reparación y Pintura de Plomo: Contratistas ↗ (Spanish · opens in a new tab)

Official Spanish related page linked by the English page; corresponding scope, certification and activities sections read.

Occupational Safety and Health Administration, U.S. Department of Labor · 1910.134 — Respiratory protection
Government guidance

Occupational Safety and Health Administration, U.S. Department of Labor · 1910.134 — Respiratory protection

What this explains: When workplace respirators are necessary or employer-required, OSHA requires a worksite-specific respiratory program. Selection depends on evaluated hazards. Required users need medical evaluation, training and, for tight-fitting respirators, fit testing before use and at least annually. Construction section 1926.103 adopts the same requirements.

Keep in mind: Not a blanket requirement for the same mask on every painting task. Particulate filters do not protect against gases or vapors; specific protection depends on hazards and exposure. The standard also distinguishes voluntary use. No claim of LMJ program compliance, employee training or fit testing is established.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
1910.134(a), (c), (d), (e)(1), (f)(2), (k); 1926.103 note.
Applies to
United States federal OSHA requirements where applicable; verify relevant state-plan requirements.. Occupational exposure and respirator use, not a product endorsement.
Original document revision
Not stated in the reviewed document
Review method
Source content reviewed with assistance from Codex
Painting Contractors Association · PCA P14 — Levels of Surface Preparation for Repainting and Maintenance Projects Receiving Architectural Coatings
Industry reference

Painting Contractors Association · PCA P14 — Levels of Surface Preparation for Repainting and Maintenance Projects Receiving Architectural Coatings

What this explains: PCA P14 distinguishes four preparation levels and explains that existing surface condition and the selected preparation affect appearance, adhesion, durability and cost. Project specifications describing the type and extent of preparation take precedence.

Keep in mind: Applies to repainting/maintenance architectural coatings on previously finished surfaces. A written scope should identify the agreed preparation; citing P14 alone does not specify a level or promise restoration of every defect. No LMJ adoption or compliance is verified.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
P14 sections 1, 2.1–2.5, 5.2 and 5.4.
Applies to
U.S. architectural painting industry guidance; project agreement controls as applicable.. Repainting/maintenance preparation, rather than a universal new-construction specification.
Original document revision
Not stated in the reviewed document · Printed identifier: 20230918 in the official linked filename
Review method
Source content reviewed with assistance from Codex

Niveles de Preparación de Superficies para Proyectos de Repintado y Mantenimiento que Reciben Revestimientos Arquitectónicos ↗ (Spanish · opens in a new tab)

Official Spanish individual P14 linked from PCA Spanish page; scope and section 5.2 read. Layout and section organization differ; exact edition parity is not established.

Benjamin Moore · Regal Select Premium Interior Paint & Primer — Matte N548: Technical Data Sheet
Manufacturer guidance

Benjamin Moore · Regal Select Premium Interior Paint & Primer — Matte N548: Technical Data Sheet

What this explains: For Regal Select Matte N548, the U.S. technical sheet lists one hour to touch and one to two hours to recoat at 77°F (25°C) and 50% relative humidity. Cool conditions or high humidity extend dry, recoat and service times. Surface application temperature is 50–90°F; washing is allowed after two weeks. Coverage is 400–450 square feet per U.S. gallon, depending on surface texture and porosity.

Keep in mind: Example for N548 only. These figures are not a promise for every paint, sheen, climate, substrate or project. Touch-dry, recoat, washing and full cure are different milestones; the sheet does not supply a universal full-cure time.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
PDF page 1, Technical Data, Dry Time and Surface Temperature During Application; page 2, Surface Preparation and safety directions.
Applies to
U.S. product sheet. Regal Select Premium Interior Paint & Primer, Matte N548.
Product / sheen
Regal Select N548 · Matte
Original document revision
Not stated in the reviewed document · Printed identifier: N548 US 032525
Review method
Source content reviewed with assistance from Codex

Regal Select PREMIUM INTERIOR PAINT & PRIMER — MATTE N548 ↗ (Spanish · opens in a new tab)

Official Spanish sheet identifier: N548 SP 030823. The English sheet is N548 US 032525. These are different editions; the reviewed dry/recoat figures agree, but exact technical parity is not claimed.

Dates record a content review, not just a working link. An internal record retains the reviewer or review tool, conditions and follow-up items.

Bring your questions to LMJ.

Your property may need a different approach. Tell us your city, the surfaces you want painted and what you would like help deciding.

Request a quote