Materials

Choose paint and sheen for the way you live

Compare the look you want with the surface, cleaning needs and product you will actually use.

Try it in real life

Choose paint for each surface.

Use this kitchen to plan the walls, cabinets and ceiling separately.

Painted wall · not the tile

Outlines mark example areas; they do not simulate a paint finish.

Step 1 of 3

Explain how you use and clean the room.

Share any grease, damp spots or frequent cleaning needs. The paint product matters as well as its sheen—the amount of light it reflects.

Try this at home

Ask which coating suits the wall and what preparation is needed.

Surface highlights identify the discussion area; they do not simulate a paint sheen or prescribe a product. Follow the selected coating’s instructions.

Why we recommend this
Manufacturer guidance

Benjamin Moore · Choosing an Interior Paint Finish: Sheen and Gloss 101

What this explains: Sheen describes reflected light. Benjamin Moore lists flat finishes for ceilings and low-traffic walls, eggshell for many walls, and satin or semi-gloss among common trim and door choices. Lower sheen can conceal surface flaws; suitability also depends on the particular coating.

Keep in mind: Typical uses, not mandatory room rules. Product formulation matters: the page specifically identifies a matte bathroom product. Do not state that all matte paint is unsuitable for bathrooms or that every higher-sheen paint universally outperforms every lower-sheen paint.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
Sheen and Gloss 101; Common Sheen Uses; Flat Paint; Matte Paint; Eggshell Paint; Satin Paint.
Applies to
United States manufacturer guidance. Benjamin Moore interior finish guidance; individual products named as examples.
Original document revision
Not stated in the reviewed document
Review method
Source content reviewed with assistance from Codex
Manufacturer guidance

Benjamin Moore · How to Paint Kitchen Cabinets

What this explains: Existing cabinet finishes require appropriate preparation. The article treats cabinet coating selection separately and protects countertops and the surrounding work area.

Keep in mind: Assess material and existing finish before selecting a system. No universal sanding method, drying time, sheen or product compatibility is asserted here. Old coatings may require lead assessment before disturbance. Counters and tile are not ordinary wall-paint surfaces.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
Steps 2–4 and 6; FAQ on cabinet preparation and product-specific application conditions.
Applies to
U.S. cabinet guidance using Benjamin Moore ADVANCE and Fresh Start as examples. This walkthrough discusses planning; it does not prescribe those products for every cabinet.
Original document revision
Not stated in the reviewed document
Review method
Source content reviewed with assistance from Codex
Industry reference

Painting Contractors Association · PCA P3 — Impact of Paint Color

What this explains: PCA P3 says the number and location of paint colors and color ranges belong in bid and contract documents. It also calls for precise placement when different materials or sheens share a surface. These choices affect estimating and project cost.

Keep in mind: Industry guidance does not demonstrate LMJ membership, certification, adoption or compliance. It supports documenting the actual agreed scope, not promising that every estimate already follows PCA. It does not endorse an aesthetic palette.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
P3 sections 2.1–2.2, 5.1–5.2 and 5.6.2.
Applies to
U.S. architectural painting industry guidance; use as the identified voluntary standard in a project agreement as applicable.. Paint color count, range, placement and associated bid/contract scope.
Original document revision
Not stated in the reviewed document · Printed identifier: 20230918 in the official linked filename
Review method
Source content reviewed with assistance from Codex

PCA P3 — Designación del color de pintura ↗ (Spanish · opens in a new tab)

Official Spanish individual standard linked from the PCA Spanish page; sections 1, 2 and color-placement provisions read. Title, organization and wording differ from the English file, so do not claim exact edition parity.

Should every room use the same paint?

LMJ planning suggestion

Describe how each room is used and how often its surfaces need cleaning. A bedroom wall, bathroom, door and cabinet can have different requirements. You may keep coordinated colors while choosing different products or sheens for particular surfaces. Ask about the selected product's intended uses rather than assuming one finish is right everywhere, or that a familiar color name identifies the whole coating system.

Why we recommend this
Manufacturer guidance

Benjamin Moore · Choosing an Interior Paint Finish: Sheen and Gloss 101

What this explains: Sheen describes reflected light. Benjamin Moore lists flat finishes for ceilings and low-traffic walls, eggshell for many walls, and satin or semi-gloss among common trim and door choices. Lower sheen can conceal surface flaws; suitability also depends on the particular coating.

Keep in mind: Typical uses, not mandatory room rules. Product formulation matters: the page specifically identifies a matte bathroom product. Do not state that all matte paint is unsuitable for bathrooms or that every higher-sheen paint universally outperforms every lower-sheen paint.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
Sheen and Gloss 101; Common Sheen Uses; Flat Paint; Matte Paint; Eggshell Paint; Satin Paint.
Applies to
United States manufacturer guidance. Benjamin Moore interior finish guidance; individual products named as examples.
Original document revision
Not stated in the reviewed document
Review method
Source content reviewed with assistance from Codex
Industry reference

Painting Contractors Association · PCA P3 — Impact of Paint Color

What this explains: PCA P3 says the number and location of paint colors and color ranges belong in bid and contract documents. It also calls for precise placement when different materials or sheens share a surface. These choices affect estimating and project cost.

Keep in mind: Industry guidance does not demonstrate LMJ membership, certification, adoption or compliance. It supports documenting the actual agreed scope, not promising that every estimate already follows PCA. It does not endorse an aesthetic palette.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
P3 sections 2.1–2.2, 5.1–5.2 and 5.6.2.
Applies to
U.S. architectural painting industry guidance; use as the identified voluntary standard in a project agreement as applicable.. Paint color count, range, placement and associated bid/contract scope.
Original document revision
Not stated in the reviewed document · Printed identifier: 20230918 in the official linked filename
Review method
Source content reviewed with assistance from Codex

PCA P3 — Designación del color de pintura ↗ (Spanish · opens in a new tab)

Official Spanish individual standard linked from the PCA Spanish page; sections 1, 2 and color-placement provisions read. Title, organization and wording differ from the English file, so do not claim exact edition parity.

How does sheen change the look?

Sheen describes how much light a finish reflects. Lower-sheen finishes can make surface imperfections less noticeable; a more reflective finish changes how the same surface looks. Compare samples with your room's light and ask about cleaning and touch-up needs. Formulation matters too: do not rule out every matte paint for a bathroom or assume every satin performs better than every lower-sheen product.

Why we recommend this
Manufacturer guidance

Benjamin Moore · Choosing an Interior Paint Finish: Sheen and Gloss 101

What this explains: Sheen describes reflected light. Benjamin Moore lists flat finishes for ceilings and low-traffic walls, eggshell for many walls, and satin or semi-gloss among common trim and door choices. Lower sheen can conceal surface flaws; suitability also depends on the particular coating.

Keep in mind: Typical uses, not mandatory room rules. Product formulation matters: the page specifically identifies a matte bathroom product. Do not state that all matte paint is unsuitable for bathrooms or that every higher-sheen paint universally outperforms every lower-sheen paint.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
Sheen and Gloss 101; Common Sheen Uses; Flat Paint; Matte Paint; Eggshell Paint; Satin Paint.
Applies to
United States manufacturer guidance. Benjamin Moore interior finish guidance; individual products named as examples.
Original document revision
Not stated in the reviewed document
Review method
Source content reviewed with assistance from Codex
Manufacturer guidance

Benjamin Moore · How to Use Paint Color Samples

What this explains: Move samples around the room and examine them from morning through evening under natural and artificial light. Benjamin Moore recommends two coats for its brush-on samples and suggests movable white foam board to compare locations.

Keep in mind: Its liquid sample paint represents interior color, comes in eggshell, and is not intended as the final coating. For exterior color review the page directs use on white foam board; do not present sample paint as an exterior finish or a durability test.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
Tips for Using Benjamin Moore Paint Color Samples; Tips for Using Peel & Stick Color Samples; Buy a Paint Sample.
Applies to
United States manufacturer guidance. Benjamin Moore display chips, liquid samples and peel-and-stick samples.
Original document revision
Not stated in the reviewed document
Review method
Source content reviewed with assistance from Codex

How can I avoid a disappointing color choice?

LMJ planning suggestion

Use photos and Color Studio to make a shortlist, then compare physical samples in the room before approving a color. Move them near the floor, furniture and finishes you will keep, and check them in daylight and under your usual lamps. Confirm the final product and sheen separately: a sample helps you judge color, but sample paint is not necessarily the coating that will finish the job.

Why we recommend this
Manufacturer guidance

Sherwin-Williams · Paint Color Visualizer

What this explains: A screen preview can differ from actual paint color. Confirm a choice with a physical color chip, color card or painted sample before purchasing.

Keep in mind: Supports a screen-accuracy caveat and physical-sample step. It does not validate LMJ hex codes, exact color matching, particular pairings, or room photographs as guaranteed finished results.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
Disclaimer directly beneath the introductory visualizer instructions.
Applies to
United States manufacturer color tool. Digital representation of Sherwin-Williams colors.
Original document revision
Not stated in the reviewed document
Review method
Source content reviewed with assistance from Codex
Manufacturer guidance

Benjamin Moore · How to Use Paint Color Samples

What this explains: Move samples around the room and examine them from morning through evening under natural and artificial light. Benjamin Moore recommends two coats for its brush-on samples and suggests movable white foam board to compare locations.

Keep in mind: Its liquid sample paint represents interior color, comes in eggshell, and is not intended as the final coating. For exterior color review the page directs use on white foam board; do not present sample paint as an exterior finish or a durability test.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
Tips for Using Benjamin Moore Paint Color Samples; Tips for Using Peel & Stick Color Samples; Buy a Paint Sample.
Applies to
United States manufacturer guidance. Benjamin Moore display chips, liquid samples and peel-and-stick samples.
Original document revision
Not stated in the reviewed document
Review method
Source content reviewed with assistance from Codex

What product information should I keep?

LMJ planning suggestion

Keep the manufacturer, product line, color name and code, sheen and surfaces painted in one record. Request the technical and safety instructions, including recoating, cleaning and ventilation. This makes later care questions easier to answer. Low- or zero-VOC wording is not a reason to ignore ventilation or other label precautions; use the instructions for the actual product and conditions in your home.

Why we recommend this
Industry reference

Painting Contractors Association · PCA P3 — Impact of Paint Color

What this explains: PCA P3 says the number and location of paint colors and color ranges belong in bid and contract documents. It also calls for precise placement when different materials or sheens share a surface. These choices affect estimating and project cost.

Keep in mind: Industry guidance does not demonstrate LMJ membership, certification, adoption or compliance. It supports documenting the actual agreed scope, not promising that every estimate already follows PCA. It does not endorse an aesthetic palette.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
P3 sections 2.1–2.2, 5.1–5.2 and 5.6.2.
Applies to
U.S. architectural painting industry guidance; use as the identified voluntary standard in a project agreement as applicable.. Paint color count, range, placement and associated bid/contract scope.
Original document revision
Not stated in the reviewed document · Printed identifier: 20230918 in the official linked filename
Review method
Source content reviewed with assistance from Codex

PCA P3 — Designación del color de pintura ↗ (Spanish · opens in a new tab)

Official Spanish individual standard linked from the PCA Spanish page; sections 1, 2 and color-placement provisions read. Title, organization and wording differ from the English file, so do not claim exact edition parity.

Manufacturer guidance

Benjamin Moore · Regal Select Premium Interior Paint & Primer — Matte N548: Technical Data Sheet

What this explains: For Regal Select Matte N548, the U.S. technical sheet lists one hour to touch and one to two hours to recoat at 77°F (25°C) and 50% relative humidity. Cool conditions or high humidity extend dry, recoat and service times. Surface application temperature is 50–90°F; washing is allowed after two weeks. Coverage is 400–450 square feet per U.S. gallon, depending on surface texture and porosity.

Keep in mind: Example for N548 only. These figures are not a promise for every paint, sheen, climate, substrate or project. Touch-dry, recoat, washing and full cure are different milestones; the sheet does not supply a universal full-cure time.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
PDF page 1, Technical Data, Dry Time and Surface Temperature During Application; page 2, Surface Preparation and safety directions.
Applies to
U.S. product sheet. Regal Select Premium Interior Paint & Primer, Matte N548.
Product / sheen
Regal Select N548 · Matte
Original document revision
Not stated in the reviewed document · Printed identifier: N548 US 032525
Review method
Source content reviewed with assistance from Codex

Regal Select PREMIUM INTERIOR PAINT & PRIMER — MATTE N548 ↗ (Spanish · opens in a new tab)

Official Spanish sheet identifier: N548 SP 030823. The English sheet is N548 US 032525. These are different editions; the reviewed dry/recoat figures agree, but exact technical parity is not claimed.

Government guidance

U.S. Environmental Protection Agency · Volatile Organic Compounds’ Impact on Indoor Air Quality

What this explains: Follow product precautions and provide ventilation when using products that release VOCs. Keep household products away from children and pets.

Keep in mind: A low-VOC label is not a room-safety guarantee or a fixed re-entry time. Workplace protection and project-specific ventilation require separate assessment.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
Steps to Reduce Exposure.
Applies to
U.S. household indoor-air guidance; consult the selected coating label and safety document.
Original document revision
June 23, 2026
Review method
Source content reviewed with assistance from Codex
Sources and review informationSee the references and when they were reviewed.

LMJ explains this information using the sources linked below. Product instructions and site conditions determine the appropriate approach. Referencing an organization does not imply its endorsement of LMJ.

Design and planning ideas are LMJ suggestions. These sources explain the technical guidance; they do not document LMJ projects or certifications.

Benjamin Moore · Choosing an Interior Paint Finish: Sheen and Gloss 101
Manufacturer guidance

Benjamin Moore · Choosing an Interior Paint Finish: Sheen and Gloss 101

What this explains: Sheen describes reflected light. Benjamin Moore lists flat finishes for ceilings and low-traffic walls, eggshell for many walls, and satin or semi-gloss among common trim and door choices. Lower sheen can conceal surface flaws; suitability also depends on the particular coating.

Keep in mind: Typical uses, not mandatory room rules. Product formulation matters: the page specifically identifies a matte bathroom product. Do not state that all matte paint is unsuitable for bathrooms or that every higher-sheen paint universally outperforms every lower-sheen paint.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
Sheen and Gloss 101; Common Sheen Uses; Flat Paint; Matte Paint; Eggshell Paint; Satin Paint.
Applies to
United States manufacturer guidance. Benjamin Moore interior finish guidance; individual products named as examples.
Original document revision
Not stated in the reviewed document
Review method
Source content reviewed with assistance from Codex
Painting Contractors Association · PCA P3 — Impact of Paint Color
Industry reference

Painting Contractors Association · PCA P3 — Impact of Paint Color

What this explains: PCA P3 says the number and location of paint colors and color ranges belong in bid and contract documents. It also calls for precise placement when different materials or sheens share a surface. These choices affect estimating and project cost.

Keep in mind: Industry guidance does not demonstrate LMJ membership, certification, adoption or compliance. It supports documenting the actual agreed scope, not promising that every estimate already follows PCA. It does not endorse an aesthetic palette.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
P3 sections 2.1–2.2, 5.1–5.2 and 5.6.2.
Applies to
U.S. architectural painting industry guidance; use as the identified voluntary standard in a project agreement as applicable.. Paint color count, range, placement and associated bid/contract scope.
Original document revision
Not stated in the reviewed document · Printed identifier: 20230918 in the official linked filename
Review method
Source content reviewed with assistance from Codex

PCA P3 — Designación del color de pintura ↗ (Spanish · opens in a new tab)

Official Spanish individual standard linked from the PCA Spanish page; sections 1, 2 and color-placement provisions read. Title, organization and wording differ from the English file, so do not claim exact edition parity.

Benjamin Moore · How to Use Paint Color Samples
Manufacturer guidance

Benjamin Moore · How to Use Paint Color Samples

What this explains: Move samples around the room and examine them from morning through evening under natural and artificial light. Benjamin Moore recommends two coats for its brush-on samples and suggests movable white foam board to compare locations.

Keep in mind: Its liquid sample paint represents interior color, comes in eggshell, and is not intended as the final coating. For exterior color review the page directs use on white foam board; do not present sample paint as an exterior finish or a durability test.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
Tips for Using Benjamin Moore Paint Color Samples; Tips for Using Peel & Stick Color Samples; Buy a Paint Sample.
Applies to
United States manufacturer guidance. Benjamin Moore display chips, liquid samples and peel-and-stick samples.
Original document revision
Not stated in the reviewed document
Review method
Source content reviewed with assistance from Codex
Sherwin-Williams · Paint Color Visualizer
Manufacturer guidance

Sherwin-Williams · Paint Color Visualizer

What this explains: A screen preview can differ from actual paint color. Confirm a choice with a physical color chip, color card or painted sample before purchasing.

Keep in mind: Supports a screen-accuracy caveat and physical-sample step. It does not validate LMJ hex codes, exact color matching, particular pairings, or room photographs as guaranteed finished results.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
Disclaimer directly beneath the introductory visualizer instructions.
Applies to
United States manufacturer color tool. Digital representation of Sherwin-Williams colors.
Original document revision
Not stated in the reviewed document
Review method
Source content reviewed with assistance from Codex
Benjamin Moore · Regal Select Premium Interior Paint & Primer — Matte N548: Technical Data Sheet
Manufacturer guidance

Benjamin Moore · Regal Select Premium Interior Paint & Primer — Matte N548: Technical Data Sheet

What this explains: For Regal Select Matte N548, the U.S. technical sheet lists one hour to touch and one to two hours to recoat at 77°F (25°C) and 50% relative humidity. Cool conditions or high humidity extend dry, recoat and service times. Surface application temperature is 50–90°F; washing is allowed after two weeks. Coverage is 400–450 square feet per U.S. gallon, depending on surface texture and porosity.

Keep in mind: Example for N548 only. These figures are not a promise for every paint, sheen, climate, substrate or project. Touch-dry, recoat, washing and full cure are different milestones; the sheet does not supply a universal full-cure time.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
PDF page 1, Technical Data, Dry Time and Surface Temperature During Application; page 2, Surface Preparation and safety directions.
Applies to
U.S. product sheet. Regal Select Premium Interior Paint & Primer, Matte N548.
Product / sheen
Regal Select N548 · Matte
Original document revision
Not stated in the reviewed document · Printed identifier: N548 US 032525
Review method
Source content reviewed with assistance from Codex

Regal Select PREMIUM INTERIOR PAINT & PRIMER — MATTE N548 ↗ (Spanish · opens in a new tab)

Official Spanish sheet identifier: N548 SP 030823. The English sheet is N548 US 032525. These are different editions; the reviewed dry/recoat figures agree, but exact technical parity is not claimed.

U.S. Environmental Protection Agency · Volatile Organic Compounds’ Impact on Indoor Air Quality
Government guidance

U.S. Environmental Protection Agency · Volatile Organic Compounds’ Impact on Indoor Air Quality

What this explains: Follow product precautions and provide ventilation when using products that release VOCs. Keep household products away from children and pets.

Keep in mind: A low-VOC label is not a room-safety guarantee or a fixed re-entry time. Workplace protection and project-specific ventilation require separate assessment.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
Steps to Reduce Exposure.
Applies to
U.S. household indoor-air guidance; consult the selected coating label and safety document.
Original document revision
June 23, 2026
Review method
Source content reviewed with assistance from Codex
Benjamin Moore · How to Paint Kitchen Cabinets
Manufacturer guidance

Benjamin Moore · How to Paint Kitchen Cabinets

What this explains: Existing cabinet finishes require appropriate preparation. The article treats cabinet coating selection separately and protects countertops and the surrounding work area.

Keep in mind: Assess material and existing finish before selecting a system. No universal sanding method, drying time, sheen or product compatibility is asserted here. Old coatings may require lead assessment before disturbance. Counters and tile are not ordinary wall-paint surfaces.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
Steps 2–4 and 6; FAQ on cabinet preparation and product-specific application conditions.
Applies to
U.S. cabinet guidance using Benjamin Moore ADVANCE and Fresh Start as examples. This walkthrough discusses planning; it does not prescribe those products for every cabinet.
Original document revision
Not stated in the reviewed document
Review method
Source content reviewed with assistance from Codex
Dates record a content review, not just a working link. An internal record retains the reviewer or review tool, conditions and follow-up items.

Bring your questions to LMJ.

Your property may need a different approach. Tell us your city, the surfaces you want painted and what you would like help deciding.

Request a quote