Preparation

Get the surface ready for paint

Understand what needs cleaning, what needs repair and how primer fits into the job.

What should a painter check first?

LMJ planning suggestion

Look together at dirt, stains, loose coating, repaired patches and the existing finish. Interior walls need suitable cleaning and time to dry before primer or paint. Ask what preparation is included and what appearance to expect afterward. A quote that clearly describes preparation is more useful than simply promising a fresh coat, especially when the current walls have visible defects.

Why we recommend this
Manufacturer guidance

Benjamin Moore · How to Prepare Walls for Painting

What this explains: Inspect the surface before painting. Remove dirt and cleaning residue, address relevant defects, and let walls dry thoroughly before primer or paint. Damp walls can cause coating problems such as blistering; preparation needs vary by surface condition.

Keep in mind: Interior-wall guidance, not a universal preparation specification. Do not copy general sanding advice into pre-1978 work without the EPA lead-rule context. It supplies no universal moisture percentage or fixed drying interval after washing.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
Introduction; Step #1 Cleaning Walls Before Painting; Step #3 Sand Surfaces Before Painting; Step #4 Priming Walls Before Painting.
Applies to
United States manufacturer guidance. General wall preparation; project-specific primer and substrate requirements still apply.
Original document revision
Not stated in the reviewed document
Review method
Source content reviewed with assistance from Codex
Industry reference

Painting Contractors Association · PCA P14 — Levels of Surface Preparation for Repainting and Maintenance Projects Receiving Architectural Coatings

What this explains: PCA P14 distinguishes four preparation levels and explains that existing surface condition and the selected preparation affect appearance, adhesion, durability and cost. Project specifications describing the type and extent of preparation take precedence.

Keep in mind: Applies to repainting/maintenance architectural coatings on previously finished surfaces. A written scope should identify the agreed preparation; citing P14 alone does not specify a level or promise restoration of every defect. No LMJ adoption or compliance is verified.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
P14 sections 1, 2.1–2.5, 5.2 and 5.4.
Applies to
U.S. architectural painting industry guidance; project agreement controls as applicable.. Repainting/maintenance preparation, rather than a universal new-construction specification.
Original document revision
Not stated in the reviewed document · Printed identifier: 20230918 in the official linked filename
Review method
Source content reviewed with assistance from Codex

Niveles de Preparación de Superficies para Proyectos de Repintado y Mantenimiento que Reciben Revestimientos Arquitectónicos ↗ (Spanish · opens in a new tab)

Official Spanish individual P14 linked from PCA Spanish page; scope and section 5.2 read. Layout and section organization differ; exact edition parity is not established.

Will painting fix stains or damaged areas?

LMJ planning suggestion

Point out water stains, recurring cracks, soft areas or peeling before the work is priced. The cause may need separate evaluation; covering a moisture problem does not resolve it. LMJ separates ordinary painting preparation from drywall, carpentry, structural, mold and water-damage repairs. Ask which work must be completed first and who is responsible, so painting starts with a surface that is ready.

Why we recommend this
Government guidance

U.S. Environmental Protection Agency · A Brief Guide to Mold, Moisture and Your Home

What this explains: Fix the water problem and address mold before painting. EPA recommends indoor relative humidity below 60%, ideally 30–50%, where possible, to help control mold.

Keep in mind: These are indoor mold-control targets, not coating application limits. Remediation needs assessment; paint does not repair a leak. This does not establish an LMJ remediation qualification.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
Mold Cleanup Guidelines; Moisture and Mold Prevention and Control Tips.
Applies to
Residential mold-prevention guidance in the United States.
Original document revision
February 18, 2026
Review method
Source content reviewed with assistance from Codex
Industry reference

Painting Contractors Association · PCA P14 — Levels of Surface Preparation for Repainting and Maintenance Projects Receiving Architectural Coatings

What this explains: PCA P14 distinguishes four preparation levels and explains that existing surface condition and the selected preparation affect appearance, adhesion, durability and cost. Project specifications describing the type and extent of preparation take precedence.

Keep in mind: Applies to repainting/maintenance architectural coatings on previously finished surfaces. A written scope should identify the agreed preparation; citing P14 alone does not specify a level or promise restoration of every defect. No LMJ adoption or compliance is verified.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
P14 sections 1, 2.1–2.5, 5.2 and 5.4.
Applies to
U.S. architectural painting industry guidance; project agreement controls as applicable.. Repainting/maintenance preparation, rather than a universal new-construction specification.
Original document revision
Not stated in the reviewed document · Printed identifier: 20230918 in the official linked filename
Review method
Source content reviewed with assistance from Codex

Niveles de Preparación de Superficies para Proyectos de Repintado y Mantenimiento que Reciben Revestimientos Arquitectónicos ↗ (Spanish · opens in a new tab)

Official Spanish individual P14 linked from PCA Spanish page; scope and section 5.2 read. Layout and section organization differ; exact edition parity is not established.

Do I need primer?

LMJ planning suggestion

Ask what the surface is, what coating is already on it and which finish paint will be used. Those details help determine whether primer is needed and which product is compatible. Have the primer and topcoat named in the scope when specified. Follow their preparation and recoating instructions together; primer is part of a coating plan, not a substitute for cleaning or correcting a damaged surface.

Why we recommend this
Manufacturer guidance

Benjamin Moore · How to Prepare Walls for Painting

What this explains: Inspect the surface before painting. Remove dirt and cleaning residue, address relevant defects, and let walls dry thoroughly before primer or paint. Damp walls can cause coating problems such as blistering; preparation needs vary by surface condition.

Keep in mind: Interior-wall guidance, not a universal preparation specification. Do not copy general sanding advice into pre-1978 work without the EPA lead-rule context. It supplies no universal moisture percentage or fixed drying interval after washing.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
Introduction; Step #1 Cleaning Walls Before Painting; Step #3 Sand Surfaces Before Painting; Step #4 Priming Walls Before Painting.
Applies to
United States manufacturer guidance. General wall preparation; project-specific primer and substrate requirements still apply.
Original document revision
Not stated in the reviewed document
Review method
Source content reviewed with assistance from Codex
Manufacturer guidance

Benjamin Moore · Regal Select Premium Interior Paint & Primer — Matte N548: Technical Data Sheet

What this explains: For Regal Select Matte N548, the U.S. technical sheet lists one hour to touch and one to two hours to recoat at 77°F (25°C) and 50% relative humidity. Cool conditions or high humidity extend dry, recoat and service times. Surface application temperature is 50–90°F; washing is allowed after two weeks. Coverage is 400–450 square feet per U.S. gallon, depending on surface texture and porosity.

Keep in mind: Example for N548 only. These figures are not a promise for every paint, sheen, climate, substrate or project. Touch-dry, recoat, washing and full cure are different milestones; the sheet does not supply a universal full-cure time.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
PDF page 1, Technical Data, Dry Time and Surface Temperature During Application; page 2, Surface Preparation and safety directions.
Applies to
U.S. product sheet. Regal Select Premium Interior Paint & Primer, Matte N548.
Product / sheen
Regal Select N548 · Matte
Original document revision
Not stated in the reviewed document · Printed identifier: N548 US 032525
Review method
Source content reviewed with assistance from Codex

Regal Select PREMIUM INTERIOR PAINT & PRIMER — MATTE N548 ↗ (Spanish · opens in a new tab)

Official Spanish sheet identifier: N548 SP 030823. The English sheet is N548 US 032525. These are different editions; the reviewed dry/recoat figures agree, but exact technical parity is not claimed.

What if the existing paint is old or unknown?

Tell the contractor the property's age and anything you know about earlier coatings before sanding, scraping or other paint disturbance. Covered paid work in pre-1978 housing and child-occupied facilities can require EPA lead-safe procedures and certified firms. Age alone does not prove lead is present, but it is a reason to check requirements before choosing preparation. Do not assume ordinary sanding and cleanup are enough.

Why we recommend this
Government guidance

U.S. Environmental Protection Agency · Renovation, Repair and Painting Program: Contractors

What this explains: Paid work that disturbs paint in pre-1978 housing or child-occupied facilities generally falls under the RRP rule, including painting preparation. Covered work has education, training, firm-certification and work-practice requirements. Firms may not advertise or perform covered renovation work without certification.

Keep in mind: The page lists exceptions, including qualifying minor repair thresholds, and says window replacement and painted-surface demolition remain covered regardless of area. Pre-1978 does not prove lead is present. This source does not establish LMJ certification or authorize LMJ to offer covered work.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
Renovation Program Overview; Firms that Require Certification; Activities Covered By the Rule; Paint testing.
Applies to
United States federal RRP guidance; actual program jurisdiction and any applicable state/local requirements must be checked for a project.. Paid renovation disturbing paint; housing and child-occupied facilities within the rule.
Original document revision
March 31, 2026
Review method
Source content reviewed with assistance from Codex

Programa de Renovación, Reparación y Pintura de Plomo: Contratistas ↗ (Spanish · opens in a new tab)

Official Spanish related page linked by the English page; corresponding scope, certification and activities sections read.

Sources and review informationSee the references and when they were reviewed.

LMJ explains this information using the sources linked below. Product instructions and site conditions determine the appropriate approach. Referencing an organization does not imply its endorsement of LMJ.

Design and planning ideas are LMJ suggestions. These sources explain the technical guidance; they do not document LMJ projects or certifications.

Benjamin Moore · How to Prepare Walls for Painting
Manufacturer guidance

Benjamin Moore · How to Prepare Walls for Painting

What this explains: Inspect the surface before painting. Remove dirt and cleaning residue, address relevant defects, and let walls dry thoroughly before primer or paint. Damp walls can cause coating problems such as blistering; preparation needs vary by surface condition.

Keep in mind: Interior-wall guidance, not a universal preparation specification. Do not copy general sanding advice into pre-1978 work without the EPA lead-rule context. It supplies no universal moisture percentage or fixed drying interval after washing.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
Introduction; Step #1 Cleaning Walls Before Painting; Step #3 Sand Surfaces Before Painting; Step #4 Priming Walls Before Painting.
Applies to
United States manufacturer guidance. General wall preparation; project-specific primer and substrate requirements still apply.
Original document revision
Not stated in the reviewed document
Review method
Source content reviewed with assistance from Codex
Painting Contractors Association · PCA P14 — Levels of Surface Preparation for Repainting and Maintenance Projects Receiving Architectural Coatings
Industry reference

Painting Contractors Association · PCA P14 — Levels of Surface Preparation for Repainting and Maintenance Projects Receiving Architectural Coatings

What this explains: PCA P14 distinguishes four preparation levels and explains that existing surface condition and the selected preparation affect appearance, adhesion, durability and cost. Project specifications describing the type and extent of preparation take precedence.

Keep in mind: Applies to repainting/maintenance architectural coatings on previously finished surfaces. A written scope should identify the agreed preparation; citing P14 alone does not specify a level or promise restoration of every defect. No LMJ adoption or compliance is verified.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
P14 sections 1, 2.1–2.5, 5.2 and 5.4.
Applies to
U.S. architectural painting industry guidance; project agreement controls as applicable.. Repainting/maintenance preparation, rather than a universal new-construction specification.
Original document revision
Not stated in the reviewed document · Printed identifier: 20230918 in the official linked filename
Review method
Source content reviewed with assistance from Codex

Niveles de Preparación de Superficies para Proyectos de Repintado y Mantenimiento que Reciben Revestimientos Arquitectónicos ↗ (Spanish · opens in a new tab)

Official Spanish individual P14 linked from PCA Spanish page; scope and section 5.2 read. Layout and section organization differ; exact edition parity is not established.

U.S. Environmental Protection Agency · A Brief Guide to Mold, Moisture and Your Home
Government guidance

U.S. Environmental Protection Agency · A Brief Guide to Mold, Moisture and Your Home

What this explains: Fix the water problem and address mold before painting. EPA recommends indoor relative humidity below 60%, ideally 30–50%, where possible, to help control mold.

Keep in mind: These are indoor mold-control targets, not coating application limits. Remediation needs assessment; paint does not repair a leak. This does not establish an LMJ remediation qualification.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
Mold Cleanup Guidelines; Moisture and Mold Prevention and Control Tips.
Applies to
Residential mold-prevention guidance in the United States.
Original document revision
February 18, 2026
Review method
Source content reviewed with assistance from Codex
Benjamin Moore · Regal Select Premium Interior Paint & Primer — Matte N548: Technical Data Sheet
Manufacturer guidance

Benjamin Moore · Regal Select Premium Interior Paint & Primer — Matte N548: Technical Data Sheet

What this explains: For Regal Select Matte N548, the U.S. technical sheet lists one hour to touch and one to two hours to recoat at 77°F (25°C) and 50% relative humidity. Cool conditions or high humidity extend dry, recoat and service times. Surface application temperature is 50–90°F; washing is allowed after two weeks. Coverage is 400–450 square feet per U.S. gallon, depending on surface texture and porosity.

Keep in mind: Example for N548 only. These figures are not a promise for every paint, sheen, climate, substrate or project. Touch-dry, recoat, washing and full cure are different milestones; the sheet does not supply a universal full-cure time.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
PDF page 1, Technical Data, Dry Time and Surface Temperature During Application; page 2, Surface Preparation and safety directions.
Applies to
U.S. product sheet. Regal Select Premium Interior Paint & Primer, Matte N548.
Product / sheen
Regal Select N548 · Matte
Original document revision
Not stated in the reviewed document · Printed identifier: N548 US 032525
Review method
Source content reviewed with assistance from Codex

Regal Select PREMIUM INTERIOR PAINT & PRIMER — MATTE N548 ↗ (Spanish · opens in a new tab)

Official Spanish sheet identifier: N548 SP 030823. The English sheet is N548 US 032525. These are different editions; the reviewed dry/recoat figures agree, but exact technical parity is not claimed.

U.S. Environmental Protection Agency · Renovation, Repair and Painting Program: Contractors
Government guidance

U.S. Environmental Protection Agency · Renovation, Repair and Painting Program: Contractors

What this explains: Paid work that disturbs paint in pre-1978 housing or child-occupied facilities generally falls under the RRP rule, including painting preparation. Covered work has education, training, firm-certification and work-practice requirements. Firms may not advertise or perform covered renovation work without certification.

Keep in mind: The page lists exceptions, including qualifying minor repair thresholds, and says window replacement and painted-surface demolition remain covered regardless of area. Pre-1978 does not prove lead is present. This source does not establish LMJ certification or authorize LMJ to offer covered work.

Read the original source ↗ (English · opens in a new tab)

Source content reviewed: November 7, 2026

Document and review details
Relevant section
Renovation Program Overview; Firms that Require Certification; Activities Covered By the Rule; Paint testing.
Applies to
United States federal RRP guidance; actual program jurisdiction and any applicable state/local requirements must be checked for a project.. Paid renovation disturbing paint; housing and child-occupied facilities within the rule.
Original document revision
March 31, 2026
Review method
Source content reviewed with assistance from Codex

Programa de Renovación, Reparación y Pintura de Plomo: Contratistas ↗ (Spanish · opens in a new tab)

Official Spanish related page linked by the English page; corresponding scope, certification and activities sections read.

Dates record a content review, not just a working link. An internal record retains the reviewer or review tool, conditions and follow-up items.

Bring your questions to LMJ.

Your property may need a different approach. Tell us your city, the surfaces you want painted and what you would like help deciding.

Request a quote